EN
3
Assembly instruction
Before assembling, make sure that you have enough space around the item. Use the supplied
tooling for assembling, before assembling please check whether all needed parts are available. It
is strongly recommended this machine to be assembled by two or more people to avoid possible
injury.
STEP 1
Attach the front stabilizer (2) and rear stabilizer
(3) to the main frame (1) with the carriage bolts
(5), arc washers (6) and acorn nuts (7) as shown.
NOTE
:
The Leveler end caps of the rear
stabilizer can be ADJUSTED to keep
the equipment stable.
STEP 2
Attach the pedals (9L/R) to the Crank (8L/R) re-
spectively, viewed from the rider’s exercising po-
sition. Always make sure the pedals are securely
tightened before any exercise.
NOTE
:
Both pedals are labeled, L for left and
R for right. To tighten the left pedal
COUNTERCLOCKWISE and the right
pedal CLOCKWISE.
STEP 3
Attach the saddle (33) to the saddle post (16) with
the nylon nut (35) and flat washer (36) as shown.
And then insert the bellow (37) to the Extension
plastic (16). Finally, insert the saddle post (16) into
the main frame (1) with the knob (29) at a proper
height as shown.
NOTE:
Please make sure the saddle (33)
tightens in the saddle post (16) when
do
exercise.
