TSKTECH.IN
C. Start to programming the TIMER
1. Press
TIMER
key. LCD screen shall
show
2. Press
DAY
key to select any of the 15
combinations of daily programs. Every
press of
DAY
key, LCD shall alternate
through the 15 combinations.
3. Press
HOUR, MIN
respectively to set
the desired Hour and Minutes for
1-ON
4. Press
TIMER
key again, the LCD
screen shall show
5. Press
DAY
key to select any of the 15
combinations of daily programs. Every
press of
DAY
key, LCD shall alternate
through the 15 combinations.
6. Repeat Step 3 to set desired Hour and
Minutes for
1-OFF
7. Press
TIMER
key again, the LCD
screen shall show
8. Repeat Programing Step 2, 3 & 4 to set
the ON / OFF program-periods (Events)
=> =>
9. When finished program-setting (events)
press
CLOCK.
Press Clock after the
number of events but ensure its pressed
after setting the OFF Time.
D. To Review or Reset the Programs
Press
“TIMER”
key, on each press the
LCD will display 18-ON and 18-OFF
events. If you want to change any of the
event timer, press
MANUAL
key and the
follow step 2 & 3.
E. COUNT DOWN FUNCTION:
In clock mode, Press
CLOCK
and
TIMER
together over 3 Sec for
Count down
Function of Timer,
LCD screen shall
display
Press and hold
CLOCK
key and
HOUR,
MIN
key respectively to set the count
down time (0:00 to 23:59)
Press the
MANUAL
key to start the
countdown. The Timer will
ON and OFF
after the set period.
Press
TIMER
to
STOP the countdown.
F. AUTO TIME DEFLECTION Correction
Weekly.
In Clock mode, press
MANUAL and
TIMER
key into auto time deflection
correction mode
Press
DAY
key to adjust time deflection,
the setting range is +/- 30 Sec. Every
week the timer will adjust the time by the
set sec.
The drift in the time over a week needs to
be observed with an accurate clock, to
know the drift.
G. SLEEP MODE
In the clock mode, Press
DAY, HOUR
keys over 3 sec the timer will go to sleep
mode and display is shutdown. This
feature to be used when the timer is not
used for a long timer and the battery
CR2032 life is extended. To activate Reset
the timer, Press key.
Day-Combination should be same for ON & OFF
PROGRAMMING THE TIMER #2
Electrical Installation should only be
carried out by a competent person
(someone who has the necessary
skills, knowledge and experience to
carry out the work safely).
TSKTECH.IN
TSKTECH.IN
TSKTECH.IN
