background image

 

2.2 – 

Locate 

Tree Section “A” 

and remove the protective caps that are on the top and bottom of the pole 

(they can be replaced when you re-pack your tree).  Insert Tree Section “A” into the tree stand (See Fig. 2B)

Make sure the pole is firmly inserted into the stand, and then turn all three screws until contact is made with 
the pole.  If Section “A” is not sitting straight, then simply loosen the screws, adjust tree pole, and retighten 
the screws. 

 

All the branches are connected to the tree’s center pole by metal hinges (See Figure 2).  Remove the packing 
strap that is around the tree section and allow the branches to fall into place. 

 

 

2.3 

– Locate 

Tree Section “B” 

and insert into the top of Tree Section “A”.   Make sure section “B” is seated 

securely into the top of section “A”.  Remove the packing strap that is wrapped around this tree section, same 
as you for Section “A”.  Allow the branches and leaves to fall into place. 

 

2.4 – 

Locate 

Tree Section “C” 

and insert into the top of the Tree Section “B”.  Make sure section “C” is 

seated securely into the top of section “B”.  Remove the packing strap that is wrapped around this tree section, 
same as you for Section “B”.  Allow the branches and leaves to fall into place. 

 

2.5 – 

Locate 

Tree Section “D” 

and insert into the top of the Tree Section “C”.  Allow the branches and 

leaves to fall into place (See Fig. 2E). 

2.6 – 

Locate 

Tree Section “E” 

and insert into the top of the Tree Section “D”.  Allow the branches and 

leaves to fall into place (See Fig. 2E). 
 

 

Fig. 2E

 

 

 

Summary of Contents for Holiday 66637




























Reviews: