background image

OPEN

OPEN

TO 

REPLACE A FUSE

CAUTION: FIRST UNPLUG YOUR PRODUCT FROM ANY POWER SOURCE.

TO 

REPLACE LIGHT BULBS

CAUTION: FIRST UNPLUG YOUR PRODUCT FROM ANY POWER SOURCE.

1. To reduce the risk of overheating, replace burned-out light bulbs promptly. Use only

     2.5 volt light bulbs only.

2. Grasp plug and remove from the receptacle or any other electrical outlet device. Do 

     not unplug by pulling on the cord.

3. Pull the light bulb and its attached plastic base straight out of light bulb holder

4. Replace light bulb with only 2.5 volt super bright type light (provided with product).

5. If the new lamp base does not fit the replacement light bulb, follow the steps below

     before step 4

    A. Remove the base of burned out light by straightening light leads and gently pull  

        bulb out.

   B. Thread metal leads of new lamp through hose in old base with one lead in each 

         hold.

   C. After lamp is fully inserted into base, bend each lead up, like other lights in the

       light set so that the leads will touch the contacts inside the light socket.

1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug

    by pulling on cord.

2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards

     plug’s metal prongs or blades

3. Remove fuse carefully (do not apply pressure to the glass part of fuse when

    removing or replacing.)

4. Risk of fire. Replace fuse ONLY with 3 Amp 120 Volt fuse. (Provided with product).

5. Close fuse cover. Return the sliding fuse cover back to its former closed position on 

    attachment plug.

6. Risk of fire. Do not replace attachment plug because it contains a safety device (fuse)

    that should not be removed. Discard product if the attachment plug is damaged.

Please contact one of our Product Specialists for assembly assistance or questions at 1-800-537-8484 or email [email protected]

Specialists are available weekdays 8:00 a.m. to 8:00 p.m. EST or Saturday 9:30 a.m. to 6:00 p.m.

USER INSTRUCTIONS

FUSE OVER 

SLIDES FORWARD

3 AMP

120 VOLT

FUSES

PUSH BULB DOWN 

TO REPLACE

PULL BULB UP 

TO REMOVE

E305737
MODEL NO.: YXOULA 100L/2F
MODEL NO.: YXOULA 50L/1F

Summary of Contents for Holiday 151883 CLE






Reviews: