background image

ASSEMBLY INSTRUCTIONS

Step 1

Step 2

Lay the carton down flat on the floor to open. Remove the bag 

containing the top sections, instruction sheet and accessory 

bag and put to the side until needed. PLEASE READ AND 

FOLLOW THE ASSEMBLY INSTRUCTION CAREFULLY 

WHEN SETTING UP THE ONE-STEP TREE

To make it easier to remove your ONE-STEP TREE, it is recom-

mended to close the carton flaps and reposition the tree carton flat 

on floor with arrows pointing upright. Please note, the tree is 

packed with storage bag, the one-step stand is attached to the tree 

and should never be removed

SKU 151867 CLE - GRAND SNOW BLUE SPRUCE 7.5ft 

CLEAR

3856 TIPS

UL 1200 REMAIN-ON LIGHTS

MAX DIAMETER 60”

HARDWARE

A.  TREE BAG

B.  ONE-STEP STAND AND PADDED COVER

C.  QUICK LIGHT POLE

D.  ACCESSORY BAG

      SURGE PROTECTOR

      REMOTE CONTROL W/RECEIVER

      EXTRA BULBS AND FUSES

      LIGHT STRING

QUANTITY: 1 SET

QUANTITY: 1 SET

QUANTITY: 1 SET

QUANTITY: 1 PC

QUANTITY: 1 SET

QUANTITY: EACH 20 PCS

QUANTITY: 2 PCS

NUMBER OF PERSONS

RECOMMENDED FOR

ASSEMBLY: 1

PARTS LIST

A.  BOTTOM

B.  MIDDLE

C.  TOP

GRAND SNOW BLUE SPRUE 7.5FT ONE STEP TREE - CLEAR - ITEM# 151867 CLE

Summary of Contents for Holiday 151867 CLE











Reviews: