Frontgate 142157, Assembly Instructions Manual

Page: 20 / 27

5. INSERT THE LOWER MIDDLE (“SECTION B”) INTO THE BOTTOM (“SECTION A”) TREE POLE. FOLLOW BY
INSERTING THE UPPER MIDDLE (“SECTION C”) INTO THE LOWER MIDDLE (“SECTION B”) TREE POLE.
FINISH BY INSERTING THE TOP (“SECTION D”) INTO THE UPPER MIDDLE (“SECTION C”) TREE POLE. .
(FIG 3~5)
FIGURE 3 FIGURE 4 FIGURE 5
6.
LOCATE THE TRIPLE PIGGY-BACKED PLUG FROM SECTION D AND PLUG INTO THE RECEPTACLE HUB
LOCATED IN SECTION C. THE HUB WILL HAVE A YELLOW CARD ATTACHED FOR EASY IDENTIFICATION.
(SECTION D CORD) (HUB RECEPTACLE TAG)
7.
ALLOW THE HINGED BRANCHES TO FALL INTO PLACE OR GENTLY PULL UP AND OUT EACH BRANCH.
8. SHAPE THE BRANCHES, STARTING AT THE BOTTOM WITH THE TIPS FARTHEST FROM THE POLE AND
CURVING OUT FROM THE POLE. ONE TO THE RIGHT, ONE TO THE LEFT AND ONE AT THE CENTER. TO
ACHIEVE A REALISTIC LOOK, EACH BRANCH SHOULD BE SHAPED.
9.
SHIFT ANY BRANCHES AS NECESSARY TO FILL ANY GAPS AND SLIGHTLY UPSWEEP ALL BRANCHES FOR
A UNIFORM LOOK.
10.
LOCATE AND PLUG BOTH EXTENSION CORDS (SECTIONS A, B & C) INTO THE PROVIDED POWER STRIP.
PLUG LOCATER MARKERS ARE COLOR CODED ON EACH SECTION. THIS WILL ALLOW EASIER PLUG IN
LOCATION FOR FUTURE ASSEMBLY.
(SECTION A EXTENSION CORD) (SECTION B EXTENSION CORD) (SECTION C EXTENSION CORD)