- PA G E 8 -
KNOBS
Our doors do not have pre-drilled
holes for knobs. Once you have
selected the position of your
knob(s), drill a guide hole from
the front side of the door,
using the 4mm drill bit.
HANDLES
Our doors do not have pre-drilled
holes for handles - however, some
designs have a predetermined
position for handles. Once you
have selected the position of your
handles, use the provided screws
to fix them into position.
TIP
If you have a piece of scrap wood available, hold it tightly at
the back of the door for the drill to continue into. This will
prevent the back side of the door from chipping.
HARDWARE
