WTAN030_REV_A01
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
4
6
7
8
3
4
3
4
2
2
5
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
FINISH
3
Congratulations! You did it. Take a step back and admire your work!
FIT AND SECURE
2
13MM
2.4
2.5
The Tank may be taken off the Rack
by removing the Plastic Cap, loosening
the M8 Eye-nut and lifting the Tank Strap
up and over as shown.
You will need to squeeze the "Y-Spring" on
the end of the Plastic Cap's retaining wire
to release the Plastic Cap from the Tank.
Place the Tank with Tank Strap (Item 2) onto
the Rack as shown, lining up the holes
in the Tank Strap with the Hex Bolts inserted
in Step 2.2 and 2.3. Ensure that the Tank is
sitting centered on the T-Slot Beading and
secure the Strap to the Rack using the
M8 Eye Nut, M8 Flat Washer and M8 x 30
Hex Bolt (Items 3, 4 & 5) as shown.
Once secured, place the two M8 Nut Caps
(Item 6) over the two Nyloc Nuts.
