RRAC184_REV_A00
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE
2
2.4
2.5
2.6
Fit your Vision X Unite light brackets to the
combined slat T-slot as shown. If multiple
lights will be used, the brackets must be
positioned male to female as shown to allow
a proper connection with the connector.
Position the light assembly as required
and fully tighten the M8 x 20 Button Head
Screws (Item 2).
Assemble your Vision X Unite LED Module
over the Light Mounting Bracket (Item 1)
using two M5 x 8 Button Head Screws and
two M5 Spring Washers (Items 4 & 5).
Insert an "H" Power Bridge Connector
(included with module) into the first module.
Slide the additional light assembly adjacent
to the previous fitted light assembly, insert-
ing the connector pins into the additional
module.
Repeat 2.5 for additional module fitments.
Refit the rack corner.
Connect your Power Cable to the one side
of your module cluster and insert the Power
Plug on the other side.
"H" Power Bridge Connector
Power Plug
3mm
5mm
3mm
5mm
Multiple Module Units
5mm
