3
2
10
6
4
1
13
14
3
JEEP JK INSTALLATION
Secure the Drop Down Table using M6 x 25
Button Heads, M6 Spring Washers,
M6 x 12 x 1 Flat Washers and Spacers
(Items 2, 4, 6 & 10) as shown.
TBRA034_REV_A00
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE
2
2.4
2.5
2.6
Insert a M6 x 30 Button Head Bolt (Item 14)
into the one side of the Jack Nut Tool
(Item 13).
Loosely tighten a Jack Nut (Item 3) onto the
Button Head Bolt as shown.
Place the assembly into one of the holes
drilled in 2.3. Using a Cordless Drill and a
4mm Allen Key Bit, set the Jack Nut (Item 3)
into the hole while holding the Jack Nut Tool
firmly.
Make sure that the Jack Nut has pulled up all
the way to the inside skin of the door panel.
Remove the trim panel from the rear door
by carefully unclipping it with a panel tool
or other similar tool.
The table may touch the cargo area mat
on models fitted with a floor subwoofer.
TIP: Keep the door closed for 24 hours
to allow the mat to form fit to the table's
shape.
JEEP JL INSTALLATION
4mm
4mm
