© 2022 FRONT RUNNER VEHICLE OUTFITTERS
3
KRFE009T_REV_A00
FIT AND SECURE
2
2.1
2.2
2.3
Flip the assembled Tray
(Refer to RRSTUNI Fitment Guide) so that the
bottom of the Tray faces up.
Insert four M8x16 Hex Bolts into the Slats
machined slots as shown.
Insert four M8x30 Hex Bolts into the Slats
machined slots as shown.
Loosely assemble the six Grab On Feet
(Item 3) onto the slats indicated in 2.1 as
shown using M8 Flat Washers and M8 Nyloc
Nut.
Note: Spacers to be used on rear feet.
Refer to GOFR001 fitment guide.
Remove the Front Covers from all the Base
Feet by loosening the two M5x10 Button
Head Screws.
Loosen and remove the M5x60 Cap Screw,
M5 Spring Washer and Cap Screw Washer.
B
D
A
B
3mm
5mm
13mm
2
3
B
A
Front
Front
A
