1
3
1
SBOX052_REV_A01
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
3
PREPERATION AND ASSEMBLY
2
2.1
2.2
2.3
Find a suitable surface to cut on.
Measure 750mm, and using a straight edge,
cut two of the Dividers for the box perimeter.
Twist the Clips (Item 3) to break them free.
Bend and crease two of the Dividers to
create the perimeter for the Wolf Pack.
Align and connect the Dividers (Item 1)
using two of the clips (Item 3).
TIP: Place masking tape across the
Divider and mark top and bottom, draw
a line to ensure the cut will be straight.
Both Dividers must be bent and creased
the same.
750mm