6
1
6
B)
Fit the plastic end caps on each end of the mounting channels (it may
be necessary to use the rubber mallet to tap them into place).
INSTALL LADDER AND COVER
1
A)
Grab your helper friend and
turn your tent over with the channels facing the
ground. Be careful with the protruding bolts. You may need to prop up the tent
using the channels.
5
A)
Determine your roof carrier mounting points.
• If you are mounting your tent to an old fashioned steel
rack, or oval/rectangular rails and load bars that are no
larger than 2” wide x 1.25” high, use the included bracket
plates. Insert the included bolts through the 8 slide plates,
and insert 4 slide plates per channel.
INSTALL RACK MOUNTING POINTS
• If you are mounting your tent on a Front Runner Slimline Rack, you have 2 choices:
1) For the standard Tent Mount Kit (FRUN16) - use the 8 8mm bolts included with the tent
mount kit and insert the bolts into all 8 slide plates, then slide 4 plates into each channel.
(You can discard the 8mm bolts that came with the tent).
2) For the Quick Release Tent Mount kit, use the 4 8mm bolts included with the Quick Release
Kit and slide 2 plates in each channel.
B)
Line up the hinge plates to the the predrilled holes along the aluminum extrusion.
Use the 4 remaining 6 x 40mm bolts to mount the 2 hinge plates. Insert the bolts from
inside the tent with the nuts on the outside. Tighten.
