Front Runner RTTENT101 Setup Manual Download Page 1

1

FEATHER-LITE ROOF TOP TENT 
SET-UP

 

GUIDE               

RTTENT101

  

IMPORTANT WARNING!

IT IS CRITICAL THAT ALL FRONT RUNNER RACKS AND ACCESSORIES BE PROPERLY AND 
SECURELY ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN 
AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH TO YOU OR TO 
OTHERS. YOU ARE RESPONSIBLE FOR SECURING THE RACKS AND ACCESSORIES TO YOUR CAR, 
CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS 
FOR ADJUSTMENT, WEAR, AND DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF 
THE INSTRUCTIONS AND CAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO 
INSTALLATION OR USE.  IF YOU DO NOT UNDERSTAND ALL  OF THE INSTRUCTIONS AND CAUTIONS, 
OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE 
INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A  PROFESSIONAL 
INSTALLER SUCH AS A QUALIFIED GARAGE OR AUTO BODY SHOP.

For more info and pics of this product, visit

INSTALL TIME:  30 minutes

1

GET ORGANIZED 

   

you will need:

Your Tent 

           

  The Ladder (in a separate box)

 

Power Drill w/ Phillips screw bit 

      

 

A solid, scratch free surface large enough to hold the tent.   

 

(you can use the cardboard that the tent shipped in , or a blanket 

 

or furnie pad on the ground)

           

A 10mm wrench/socket

 

A 13mm wrench/socket

 

A friend for step 4, 6 and 7  (10 minutes)

if mounting to open over the rear of the vehicle, you will also need:

 

Hack Saw or similar (only needed for mounting the tent to 

 

open to the rear)

 

Sharpie or suitable instrument for marking metal

 

 

1

...CONT’D

US

Summary of Contents for RTTENT101











Reviews: