RRAC249_REV_A00
© 2022 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE
2
2.1
2.2
2.3
Remove the Corner as Shown.
Pre-assemble the Latch as shown in Fig 1.1.
Slide the Latch into either the Side
Profile or Combined Slat, depending
where you mounted the table brackets,
(TBRA039 - Sold Separately.)
Center the Latch between the Pro Table
Under Rack Brackets (refer to Fitment Guide
TBRA039), and fully tighten.
Refit the Corner.
Tightening Torque:
M8 : 15-20Nm / 11.06 ft lb - 14.75 ft lb
