Front Runner RRAC189 Assembly And Mounting Instructions Download Page 4

Page: 4 / 4

RRAC189_REV_A00

13MM

INSTALL OTHER VEHICLE AND RACK ACCESSORIES

Now's the time to visit your favorite Front Runner dealer in person or online.

Be sure to tag us. We love to see our gear in action! #FrontRunnerOutﬁtters #BornToRoam

Share your adventures on:

FINISH

Congratulations! You did it. Take a step back and admire your work!

Assemble the Quick Release 9mm Insert

to the Thru Axle Bracket (Item 2 & 3) as

shown in ﬁg 1.1. Decide where you want to

mount your bicycle on the rack. Figure out

the correct spacing between the fork and

rear wheel. To ﬁt the Thru Axle Extrusion

(Item 2), slide two M8 x 20 Hex Bolts (Item

5) into the T-slot of the choosen slat. Place

the Thru Axle Bracket (Item 2) over the two

Hex bolts and secure to the rack using two

M8 Nyloc Nuts (Item 6). Mount the Rear

Wheel Mounting Bracket (Item 1) to a slat

as shown. Slide two M8 x 20 Hex Bolts (Item

5) into the chosen slat. place the Bracket

over the Hex Bolts and line up the Bracket

with the center of the Thru Axle Bracket.

Secure the Rear Wheel Bracket to the rack

using M8 Nyloc Nuts (Item 6). Place M8 Nut

caps over all Hex Bolts.

Mounting to a Slimsport Rack

2.4

Summary of Contents for RRAC189

Page 1: ...SPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT RUNNER PRODUCTS TO YOUR VEHICLE CHECKING THE ATTACHMENTS PRIOR TO USE AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT WEAR AND DAMAGE THEREFORE...

Page 2: ...1 IN THE BOX 3 1 1 X Bike Rear Wheel Holder 2 1 X Thru Axle Bracket 68mm 3 2 X Quick Release 9mm Insert 4 1 X Fork Mount Holder Quick Release 5 4 X M8 x 20 Hex Head Bolt 6 4 X M8 Nyloc Nut 7 4 X M8 Nu...

Page 3: ...loc Nuts Item 6 Place M8 Nut caps over all Hex Bolts Assemble the Quick Release 9mm Insert to the Thru Axle Bracket Item 2 3 as shown in g 1 1 Figure out the correct spacing between the fork and rear...

Page 4: ...you want to mount your bicycle on the rack Figure out the correct spacing between the fork and rear wheel To t the Thru Axle Extrusion Item 2 slide two M8 x 20 Hex Bolts Item 5 into the T slot of the...