2021
1790
1992
2794
4685
1.0m
0.5m
5cm
Scale: 1:25
All measurements in millimeters.
LALD006_REV_A02
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
4
FIT AND SECURE
2
2.4
2.5
2.6
Assemble the Ladder Top Assembly from 2.1
to the Ladder Sides using M6 x 16 Button
Head Bolts, M6 x 12 x 1SS Flat Washers and
M6 Nyloc Nuts (Items 9, 10 & 26) as shown.
Place M6 Nut Caps (Item 17) on all the Nyloc
Nuts.
Loosely insert two M6 x 60 Cap Screws with
M6 SS Spring Washers and M6 x 19 x 1SS
Flat Washers (Items 13, 21 & 25) through the
Clamp (Item 4) into the Ladder Top (Item 3)
as shown.
4mm
Swing open the Clamp. Fit the top asembly
into vehicle's gutter.
Align the Ladder with the edge of the door.
Inside the vehicle, remove the rear left
window cover and speaker box.
Check door clearance and make sure the
ladder is aligned straight with the door.
Mark the bottom two holes of the Ladder on
the vehicle's body and remove the Ladder.
Using a drill machine and a 6mm drill bit,
drill two pilot holes on your markings.
Change to a 8.5mm drill bit and drill the
holes to 8.5mm.
6mm
8.5mm
26
9
10
17
21
25
13
10mm
