24
-
MIG/MAG Standard
-
MIG/MAG pulse synergic
(8)
Operating point 2 indicator
illuminates when
-
selector switch (4) is set to operating point 2
-
operating point 2 is running
(9)
Slope 2 potentiometer
for adjusting the transition time from operating point 2 to operating point 3
, setting range 0.1 - 9.9 s
(10)
Operating point 3 indicator
illuminates when
-
selector switch (4) is set to operating point 3
-
operating point 3 is running
IMPORTANT!
If using the VR 4000-30 TIME wire-feed unit, the "Job mode" function is not
available. After connecting the wirefeeder, the only welding processes that can be selected
on the power source are as follows: