Fronius MagicWave 1700 Job, Operating Instructions Manual

Page: 133 / 148

133
EN
Technical data
Special voltages
CAUTION!
An inadequately dimensioned electrical installation can cause serious damage.
► The mains lead and its fuse must be dimensioned accordingly.
The technical data shown on the rating plate applies.
MagicWave
1700 / 2200 Job
MW 1700 Job MW 2200 Job
Mains voltage 230 V 230 V
Mains voltage tolerance -20 % / +15 % -20 % / +15 %
Mains frequency 50/60 Hz 50/60 Hz
Mains fuse protection (slow-blow) 16 A 16 A
Mains connection
1)
Restrictions possible No restrictions
Primary continuous power (100% d.c.
2)
) 3.3 kVA 3.7 kVA
Cos phi 0,99 0,99
Welding current range
TIG 3 - 170 A 3 - 220 A
Electrode 10 - 140 A 10 - 180 A
Welding current at
10 min/25 °C (77 °F) 40% d.c.
2)
170 A 220 A
10 min/25 °C (77 °F) 60% d.c.
2)
140 A 180 A
10 min/25 °C (77 °F) 100% d.c.
2)
110 A 150 A
10 min/40 °C (104 °F) 35% d.c.
2)
170 A 220 A
10 min/40 °C (104 °F) 60% d.c.
2)
130 A 170 A
10 min/40 °C (104 °F) 100% d.c.
2)
100 A 150 A
Open circuit voltage 88 V 88 V
Working voltage
TIG 10.1 - 16.8 V 10.1 - 18.8 V
Electrode 20.4 - 25.6 V 20.4 - 27.2 V
Striking voltage (U
p
) 9.5 kV 9.5 kV
The arc striking voltage is suitable for manual operation.
Degree of protection
IP 23 IP 23
Type of cooling AF AF
Insulation class B B
EMC emission class
(in accordance with EN/IEC 60974-10)
A A
Dimensions L x W x H (with handle) 485 / 180 / 344 mm
19.1 / 7.1 / 13.6 in.
485 / 180 / 390 mm
19.1 / 7.1 / 15.4 in.
Weight (without handle) 14.6 kg
30.8 lb.
17.4 kg
38.3 lb.
Weight (with handle) 15 kg
33 lb.
17.8 kg
39.2 lb.
Mark of conformity S, CE S, CE