64
The Setup menu items
Standby
Manual activation / deactivation of Standby mode
-
The power electronics are switched off in standby mode. No energy is fed into the grid.
-
The Startup LED will show steady orange.
-
In Standby mode, no other menu item in the Setup menu can be accessed or adjusted.
-
The automatic switchover into the 'NOW' display mode after 2 minutes of keyboard in-
activity does not occur.
-
Standby mode can only be terminated manually by pressing the 'Enter' key.
-
Feeding energy into the grid can be resumed at any time (deactivate 'Standby').
Switching off Standby mode (manually switching off feeding energy into the grid):
Select the 'Standby' menu item
Press the 'Enter' key
'STANDBY' and 'ENTER' appear alternately on the display.
Standby mode is now active.
The Startup LED shows steady orange.
Resuming feeding energy into the grid:
'STANDBY' and 'ENTER' appear alternately on the display when in Standby mode.
Press the 'Enter' key to resume feeding energy into the grid
The 'Standby' menu item is displayed.
At the same time, the inverter enters the startup phase.
The operating state LED shows steady green when feeding energy into the grid has been
resumed.
Contrast
Adjusts contrast on the display.
Since the contrast is temperature-dependent, when the ambient conditions change it may
be necessary to adjust the 'Contrast' menu item.
1
2
1
Unit
-
Setting range
0 - 10
Factory setting
5
