27
EN
Care, maintenance and disposal
General remarks
Under normal operating conditions the cooling unit requires only a minimum of care and
maintenance. However, it is indispensable to follow some important points to ensure the
operationality of the welding machine for many years.
Safety
WARNING!
An electric shock can be fatal.
Before opening up the machine, switch it off, unplug it from the mains and put up a clearly
legible and easy-to-understand warning sign to stop anybody inadvertently switching the
machine back on again. The casing screws are a suitable protective conductor connection
for grounding the casing. The screws must not be replaced by other screws without reliable
protective conductor connection.
CAUTION!
Danger of scalding from hot coolant fluid.
Do not inspect the coolant connection points until the coolant has been allowed to cool.
IMPORTANT!
The coolant must not be disposed of via the sewerage!
NOTE!
For refilling the cooling unit only use coolant of the manufacturer.
Symbols for care
and maintenance
of the cooling unit
(1)
Check coolant level
(2)
Change the coolant
(3)
Gas purge the cooler
(4)
Read operating instructions
The relevant maintenance intervals and
work are described in detail in the following
pages.
(1)
(2)
(3)
(4)
