Fronius FDV 15 MF, Operating Instructions Manual

Page: 25 / 44

23
1. Attach the snap hook of the load
securing device to the securing ring of
the driving vehicle
Attach load securing device
Attach fall
protection
(vertical
operation)
IMPORTANT! In vertical operation, the driving vehicle must be secured by a load secur-
ing device with a locking function to prevent it from falling. The load securing device must
be designed for the total weight of the vehicle. The manufacturer accepts no liability for
any damage to persons or property resulting from vertical use of the driving vehicle with-
out a load securing device.
Check the cable
2. Make sure the cable is kept perma-
nently taut
1. Undo the fastening screw (a) on the
torch holder
2. Insert the welding torch and tighten the
fastening screw (a)
3. Adjust the torch angle:
- Loosen the fastening screw (b)
with an Allen key
- Turn the clamp block and
set the desired angle
- Tighten the fastening screw (b)
4. Turn the adjusting wheel on the
relevant mechanical adjustment unit
(c), (d) until the correct welding torch
position is reached.
Fitting the welding torch
Mounting and
adjusting the
welding torch
(a)
(d)
(c)
(b)
NOTE! Do not stand beneath a
suspended driving vehicle.