Fronius AccuPocket 150/400 TIG, Operating Instructions Manual

Page: 75 / 88

Control elements and connections
Safety
WARNING!
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
▶
Read and understand this document in full.
▶
Read and understand all safety rules and user documentation for this device
and all system components.
As a result of software updates, you may find that there are functions available
on your device that are not described in these Operating Instructions, or vice
versa.
Certain illustrations may also differ slightly from the actual controls on your
device, but these controls function in exactly the same way.
Connections and
components
(1) (2) (3)
(1) Mains cable
for connection to the mains
(2) Connection P1 - charging lead
socket
to plug in the charging cable for
connection to the power source
(3) Control panel
Control panel
CHARGING
ActiveCharger
1000
QUICK CHARGING
QUICK
CHARGE
QUICK
CHARGE
COMPLETED
(5) (4)
(1)
(2)
(3)
(6)
(1) CHARGING indicator (green)
Charging in progress
(2) QUICK CHARGING indicator
(green)
Quick charging in progress
(3) COMPLETED indicator (green)
Power source fully charged
(4) Error indicator (red)
See section Troubleshooting on
page 79
(5) Mains indicator (green)
Mains supply voltage available
(6) QUICK CHARGE button
Starts and stops quick charging
75
EN