Fronius 4,044,008, Operating Instructions Manual

Page: 68 / 136

68
Changing the torch body manually
Safety
Changing the
torch body manu-
ally When carrying out the following work, position the robot arm and the torch body cou-
pling so that
- the Unlock/Lock button on the torch body changeover station can be pressed with
one hand
- the torch body can be placed onto or removed from the torch body coupling with
the other hand
Hold the torch body on the robot arm
with one hand
Press and hold the Unlock/Lock button
(1) on the torch body changeover stati-
on
- Torch body coupling lock (2)
opens
Remove torch body from torch body
coupling
Place torch body back onto the torch
body coupling, press against the torch
body coupling and hold in this position
Release the Unlock/Lock button on the
torch body changeover station
- lock closes
- Torch body is fixed after approx. 5
seconds
CAUTION! Risk of injury from escaping compressed air and flying parts from the
torch body coupling. When manually changing the torch body, always wear the
following protective equipment:
-
ear protection
- protective goggles with side protection
- gloves - electrically insulated and providing protection against heat
1
(2)
(1)
2
3
4
5
6