P380 Pneumatic Strapping Tool Operation Manual | FPA001 | Apr 2018 | Page 7
3.8 Sealing the Straps
Press down and release immediately the
sealing valve lever.
The plastic strap is welded and cut off from the
rest of the strap.
After welding of the strapping it is neither
permitted to tension again nor to weld
again. After welding and cooling the tool
has to be removed from the strapping
before a new strapping cycle is started.
Disregard of this instruction can cause
severe malfunction and damage to the tool.
After the expiration of the adjusted sealing time, the seal has to cool down approx.
2 sec.
During that time the tool cannot be removed from the sealed strap.
After the expiration of the adjusted cooling time the welding jaw move upwards.
Now the tool can be removed from the strap.
The tool must not be removed from the strap as long as the cooling time is not
finished. Disregard of this regulation is causing insufficient seal efficiencies,
which can cause severe injuries.
3.9 Removing the Tool
Pull up the handle lever,
Pull the tool right and off the
strapping.