6
P356000101enT1.man
6
INSTALLATION
6.1
Compressed air connection
The compressed air is to be connected to the tool preferably by a quick disconnecter (G1/4).
An air-unit consisting of a separator for water and dirt, a pressure regulator with a manometer and a lubricator
must be installed within a range of 15 ft / 5 meters. The compressed air must be free from dirt, rust and
moisture.
Possible connections at the tool
Factory produced the connection for the
air supply is prepared from the top.
According to requirement the connection
can also be assembled to the rear end of
the tool.
6.2
Accessories
Use only parts and accessories mentioned in the operating instruction.
Using other parts or accessories can cause injuries to you and other persons.
Wearing plate
As an option, tool can be equipped with a
wearing plate to protect base from
excessive wear on abrasive package
surfaces (like bricks, concrete blocks etc.).
The complete wearing plate can be
ordered together with the fastening screws
under item number P35.0148.
P35.0148
P35.3303
N1.2221
