4-13
4.9.2 Exchange of cutter, welding stop gripper and welding gripper
Disassembling
•
Disassemble security ring N2.1118, pull the grip axle P35.2064 from the tool.
•
Tilt down the handle lever P32.1212 and remove it from the tool.
•
Remove cover P35.3222 and end cover P35.3211.
•
Disassemble spring N2.5823, tensioning body and tensioning wheel with bearing.
•
Don’t loose
screw N1.1553 at the coupler P35.0146.
•
Disassemble the security ring N2.1121 from the coupler P35.0146;
•
Pull out the centering sleeve P32.1710 from the guide case to left, disassemble the guide case;
•
Pull out the pressure spring N2.5282 with a screw driver from the cutter P35.3214;
•
Remove the cutter from the driving pin P32.1032;
•
Unscrew cover P35.3126, push it away to the top;
•
Disassemble the two security rings N2.1121 at the left hand side of the welding gripper;
•
Disassemble the left driver P32.1035;
•
Press down the piston P35.0138;
•
Remove the two bolts P32.1028 and P32.1032;
Attention! When releasing the piston, it jumps to the top due to spring pressure!
•
Take piston with springs from the tool;
•
Remove thrust piece P32.1029 from the welding gripper;
•
Lift the rocker P32.1510 behind the welding gripper with a screw driver, remove the welding gripper together with
the ball cage P32.1027 and the balls N3.1702 from the tool;
•
Unscrew welding stop gripper P35.3128 from the bottom, take it from the tool.
P35.2064
Tensioning body
P35.3222
P32.1710
Guide case
P35.0146
N2.1121
N2.1118
P32.1212
P32.1029
6 x N3.1702
P32.1027
P32.1511
P32.1028
P35.3211
P35.3128
P35.3214
N2.5282
P32.1035
N2.1121
N2.5823
Tensioning wheel
P32.1032
P35.3126
P35.0138
P32.1510
Klüber Isoflex Alltime SL2
Mobilux EP2
Klüber Isoflex NBU 15
Loctite 222
N1.6504
N1.1305
N2.1121
P32.1035
Molykote BR2 plus
