Fromm FS380, Use And Maintenance Manual, Page: 78 / 100

72
Rev.2 01/03/2021
Use and Maintenance Manual | TURNTABLE - MAST
72
H) Move the reflector (10) in the proper position so when the
turntable (11) opening corresponds to the ramp (3) , the reflector
(10) corresponds to the sensor (12) and remains in that position
regardless of the position of the ramp (3) . To facilitate the
operation, manually turn the plate until the reflector (10) is in
correspondence with the open side, remove it by unscrewing the
screws (13) , turn the plate again until the open side is located in
the new mounting position for the reflector (10) , and attach it
using the same screws (13) .
12
11
3
10
13
- I - for front position
- II - for right position
- III - for left position
I
III
II
»
See Picture 48 - pag. 72
Picture 48
»
See Picture 49 - pag. 72
Picture 49