16
P327mane-3.fm
9.2
Exchange of cutter, welding stop gripper and welding gripper
Disassembling
•
Unscrew cover P32.2066 and remove it;
•
Unscrew end cover P35.3211 and remove it;
•
Remove the torsion spring N2.5823 and the tensioning body;
•
Remove the tensioning wheel together with the bearing N3.1172 from the tool;
•
Disassemble the security ring N2.1118 and remove the lever P32.1414 from the handle shaft;
•
Don’t
loosen screw N1.1553 at the coupler P32.1251.
•
Disassemble the security ring N2.1121 from the coupler, remove the coupler;
•
Pull out the centering sleeve P32.1710 from the guide case P35.3215 to left, disassemble the guide case;
•
Pull out the pressure spring with a screw driver from the cutter P35.3214;
•
Remove the cutter from the driving pin P32.1032;
•
Disassemble the screws N1.1305, lift slightly the welding stop gripper P35.3128 and the steel insert P35.3127
and remove them from the tool;
•
Push the steel insert without welding stop gripper under the welding gripper P32.1511 until it touches the parallel
pin N2.2110;
•
Press down lever P32.2028, if the welding gripper does not sit on the steel insert, put a piece of plastic strap
between welding gripper and steel insert.
•
Disassemble the safety ring N2.1121 from the bolt P32.1028, remove the bolt from the welding gripper;
•
Press in coupler P32.1410 in order to release the lever P32.2028 again;
•
Pull out the steel insert with care to right under the welding gripper;
•
Disassemble the security rings N2.1121 from the driving pin P32.1032, remove the driver P32.1035 from the
driving pin;
•
Lift the rocker P32.1510 behind the welding gripper with a screw driver, remove the welding gripper together with
the ball cage P32.1027 and the balls N3.1702 from the tool;
•
Lower the rocker, remove the thrust piece P32.1029 from the tool.
N2.1121
c
P32.1035
N2.1121
P32.1035
c
N1.1904
N1.1929
N1.6503
P32.2066
P32.1710
P35.3215
N2.1121
P32.1028
h
P32.1027
g
6 x N3.1702
g
P35.3127
f
N1.1305
N1.6504
P32.1511
g
P35.3211
N1.1925
N1.6504
N2.1118
P32.1414
c
P32.1032
P32.1410
P32.2028
d
Molykote BR2 plus
f
Loctite 222
g
Klüber Isoflex Alltime SL2
h
Klüber Isoflex NBU 15
P32.1029
g
P35.3214
c
d
Tensioning wheel
N2.5823
N3.1172
c
Mobilux EP2
P32.1251
N1.6503
N1.1904
N2.2110
P35.3128
Tensioning body
Pressure spring
