Design Information | 3
M2050222_en | Installation instructions Lambdamat LM 1500 KOM
7
3 Design Information
3.1 Overview of standards
Perform installation and commissioning of the system in accordance with the local fire
and building regulations. Unless contrary to other national regulations, the latest versions
of the following standards and guidelines apply:
3.1.1 General standards for heating systems
EN 303-5
Boilers for solid fuels, manually and automatically fed combustion
systems, nominal heat output up to 500 kW
EN 12828
Heating systems in buildings - design of water-based heating
systems
EN 13384-1
Chimneys - Thermal and fluid dynamic calculation methods
Part 1: Chimneys serving one appliance
ÖNORM H 5151
Planning of central hot water heating systems with or without hot
water preparation
ÖNORM M 7510-1
Guidelines for checking central heating systems
Part 1: General requirements and one-off inspections
ÖNORM M 7510-4
Guidelines for checking central heating systems
Part 4: Simple check for heating plants for solid fuels
3.1.2 Standards for structural and safety devices
ÖNORM H 5170
Heating installation - Requirements for construction and safety
engineering, as well as fire prevention and environmental protection
TRVB H 118
Technical directives for fire protection/prevention (Austria)
3.1.3 Standards for heating water
ÖNORM H 5195-1
Prevention of damage by corrosion and scale formation in closed
warm water heating systems at operating temperatures up to 100°C
(Austria).
VDI 2035
Prevention of damage hot water heating systems (Germany)
SWKI BT 102-01
Water quality for heating, steam, cooling and air conditioning
systems (Switzerland)
UNI 8065
Technical standard regulating hot water preparation.
DM 26.06.2015 (Ministerial Decree specifying the minimum
requirements)
Follow the instructions of this standard and any related updates.
(Italy)
