5.10 Electrical connection
DANGER
When working on electrical components:
Risk of electrocution!
When work is carried out on electrical components:
❒ Always have work carried out by a qualified electrician
❒ Observe the applicable standards and regulations
➥ Work must not be carried out on electrical components by unauthorised
persons
5.10.1 Establishing the connection line to the boiler
The following connecting lines must be provided from the boiler to the control cabinet
of the electrostatic precipitator system:
▪ Power supply 400 V
▪ Power supply 24 V
▪ X2X link
IMPORTANT: Route the cables so that they do not touch any hot parts and there is no
danger of tripping.
Note: All information on the electrical connection can be found in the enclosed wiring
diagram!
5.10.2 Potential equalisation
❒ The potential equalisation must comply with current directives, regulations and
standards
❒ Further connect potential equalisation with:
➥ Flue gas system
5
Assembly
Electrical connection
32
Fröling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
