25
WEATHER ALERT SETTING
Weather Alert can alert you of certain weather conditions . Once the alert criterion is met, the
alarm sound will activate and the LCD’s alert icon will flash.
To set alert
1 . Press [ ALERT ] to select and display the desired weather alert reading in the sequence
below:
Alert reading Sequence
Setting Range
Display Section
Default Value
Outdoor Temperature High Alert
-40°C ~ 80°C
Outdoor temperature &
humidity section
(
OUTDOOR
)
40°C
Outdoor Temperature Low Alert
0°C
Outdoor Humidity High Alert
1% ~ 99%
80%
Outdoor Humidity Low Alert
40%
Indoor Temperature High Alert
-40°C ~ 80°C
Current Indoor
temperature & humidity
section
(
INDOOR
)
40°C
Indoor Temperature Low Alert
0°C
Indoor Humidity High Alert
1% ~ 99%
80%
Indoor Humidity Low Alert
40%
Wind Speed
0.1m/s ~ 50m/s
Wind direction & speed
section (
WIND
)
17 .2mm/h
Pressure Drop (within 30
minutes)
1hPa ~ 10hPa
Barometer section
(
BARO
)
3hPa
Daily Rainfall
1mm ~
1000mm
Rainfall section
(
RAINFALL
)
100mm
2 . Under the current alert reading, press and hold [ ALERT ] key for 2 seconds to enter alert
setting and the alert reading will flash.
3 . Press
[ GRAPH / Λ ] or [ °F / °C / V ] key to adjust the value or press and hold the key to
change rapidly .
4 . Press [ ALERT ] key to save the alert reading then press [ ALARM ] key to toggle the
regarding alert on/off .
Alert on
Alert off
5 . Press any key on the front side to save and back to normal mode, or it will automatically
back to normal mode after 30 seconds without pressing any key .
To silence the alert alarm:
Press [ ALARM / SNOOZE ] key to silence the alert alarm or let the alarm automatically turn off
after 2 minutes .
Note:
- Once the alert is triggered, the alarm will sound for 2 minutes and the related alert icon will
flash.
- If the alert alarm is automatically off after 2 minutes, the alert icon will stop flashing.
- The weather alert will sound again when the weather readings falls into the alert range
again .
