2.Before inserting the batteries, find
the channel number and temperature:
Channel Number
: This device supports up to eight sensor
change Dip Switches 1, 2 and 3, as
Temperature Units:
To change the transmitter display units of
vs. °C), change Dip Switch 4, as
Switch in down position.
3.Insert two AA batteries.
4.Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are on
the display.
5.Close the battery door.
Repeat for the additional remote transmitters
different channel.
4
Sensor Placement
The best mounting location for the indoor sensor is in a location that never receives direct sunlight,
not even through windows. Also, do not install in a location where a nearby radiant heat source
(radiator, heaters, etc.) will affect it. Direct sunlight and radiant heat sources will result in
inaccurate temperature readings.
The sensor is meant to provide indoor conditions for display on the console, but if you would rather
have a second source for outdoor conditions instead,
weatherproof, but besides heeding the placement instructions above, you should also attempt to
mount the unit under cover (eve or awning or similar).
To mount or hang the unit on a wall or wood beam:
Use a screw or nail to affix the remote
Hang the remote sensor using a st
Note:
Make sure the sensor is
insure optimum reception. Wireless signals are impacted by distance, interference (other weather
stations, wireless phones, wireless routers, TVs and computer monitors), and transmission
3
re inserting the batteries, find the dip switches above the battery compartment and set
the channel number and temperature:
device supports up to eight sensors. To set each channel number,
change Dip Switches 1, 2 and 3, as shown below.
To change the transmitter display units of temperature
C), change Dip Switch 4, as shown below.
Switch in down position.
Switch in up position.
Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are on
Repeat for the additional remote transmitters(sold separately), verifying each remote is on a
The best mounting location for the indoor sensor is in a location that never receives direct sunlight,
not even through windows. Also, do not install in a location where a nearby radiant heat source
l affect it. Direct sunlight and radiant heat sources will result in
inaccurate temperature readings.
The sensor is meant to provide indoor conditions for display on the console, but if you would rather
have a second source for outdoor conditions instead, you can mount this unit outside. The unit is
heeding the placement instructions above, you should also attempt to
mount the unit under cover (eve or awning or similar).
To mount or hang the unit on a wall or wood beam:
or nail to affix the remote sensor to the wall, as shown below,
Hang the remote sensor using a string, as shown below.
Make sure the sensor is mounted vertically and not lying down on a flat surface. This will
insure optimum reception. Wireless signals are impacted by distance, interference (other weather
stations, wireless phones, wireless routers, TVs and computer monitors), and transmission
above the battery compartment and set
s. To set each channel number,
temperature measure (°F
Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are on
, verifying each remote is on a
The best mounting location for the indoor sensor is in a location that never receives direct sunlight,
not even through windows. Also, do not install in a location where a nearby radiant heat source
l affect it. Direct sunlight and radiant heat sources will result in
The sensor is meant to provide indoor conditions for display on the console, but if you would rather
you can mount this unit outside. The unit is
heeding the placement instructions above, you should also attempt to
below, or
mounted vertically and not lying down on a flat surface. This will
insure optimum reception. Wireless signals are impacted by distance, interference (other weather
stations, wireless phones, wireless routers, TVs and computer monitors), and transmission
