manualshive.com logo in svg

Frizzlife PD800-TAM4, Owner'S Manual, Page: 13 / 20

Share
Download
Frizzlife PD800-TAM4 Owner'S Manual Download Page 13

!

Note:  All the service life of the filter cartridge listed are based on actual

             laboratory test and the provided water. The actual service life of

             filter cartridge depends on source water quality and daily water usage.

 The replacement filer cartridges are: PP+CB 2-in-1 filter and RO membrane

 

 Please replace filter cartridges regularly according to the recommended

 replacement period shown below. 

 8. Replacement of Filter Cartridge

Filter Life Reset 

!

Manual flushing 

When the system is in standby status, press the "Flush" button, the system

will start flushing. Press the "Flush" button again to stop. 

    Note: When the system is being flushed, the indicatior will flash in blue.

Select filter: when the system is powered on, long press the "Reset"

for 3 seconds, the buzzer will beep and you can start to select the filter

you want to change. Press "Reset"button to change between the filters

and the selected filter lifetime indicator will flash.

Reset: after selecting the filter, long press "Reset" button for 3 seconds. 

You will hear a beep. The selected filter's indicator will return to white light, 

which means the filter is successfully reset. If you do not operate within 

10 seconds, it will automatically exit this mode and resume normal display

Revocation of reset: select the wrong-operated filter, long press "Reset"

and "Flush" buttons for 3 seconds. The buzzer will beep for 3 times. The 

filter indicator will return to the color status before reset. (Note: the reset 

can be revoked within 5 minutes. If the system is powered off after the 

reset, the revocation will be invalid.).

1

FRIZZLIFE INC.

www.frizzlife.com

Page 11

C. Flushing when constant water production: if the system constantly 

     keeps producing water for 10 minutes, it will be automatically flushed 

     for 15 seconds.

Position 
 

Recommended 

Replacement Period

 

One year or cumulative

water production for 60 

hours(around 900-1000gal)
Two years or cumulative

water production for 120

 hours(around 1800-2000gal)

around 900-1000gal

Model Number
 

ASR211
 

ASR212-800G
 
TAM4
 

Filter
 

PP+CB 2-in-1 filter
 

RO membrane
 

Alkaline remineralization filter
 

1st stage
 

2nd stage
 

3rd stage
 

Model: PD800-TAM4

2

3

Summary of Contents for PD800-TAM4





















Reviews:

No comments