FRIULAIR AMD 3-168, Users Maintenance And Spare Parts Manual

Page: 7 / 52

AMD 3 AMD 3 AMD 3 AMD 3----168 168 168 168 ----EN EN EN EN----
2.3. INSTALLATION SITE
Failure to install dryer in the proper ambient conditions will affect the dryer’s ability to condense
refrigerant gas. This can cause higher loads on the compressor, loss of dryer efficiency and
performance, overheated condenser fan motors, electrical component failure and dryer failure due
to the following: compressor loss, fan motor failure and electrical component failure. Failures of
this type will affect warranty considerations.
Do not install dryer in an environment of corrosive chemicals, explosive gasses, poisonous
gasses; steam heat, areas of high ambient conditions or extreme dust and dirt.
Don’t use water to extinguish fire on the dryer
on in the surrounding area.
Minimal installation requirements :
•
Select a clean room dry, free from dust, and protected
from atmospheric disturbances.
•
The supporting area must be smooth, horizontal and
able to hold the weight of the dryer.
•
Minimum ambient tempe1 °C.
•
Maximum ambient tempe45°C.
•
Leave at least 1 meter of free space on every side of
the drier for ventilation purposes and maintenance
operations.
The dryer doesn't require to be fixed to the supporting
surface. The dryer needs to be fixed to the supporting
surface only with particular installation procedures
(dryer on brakets, hanging units, etc.)
Dryer hanging (AMD 3-32 only):
Dryer A [mm] B [mm] C [mm] D [mm]
AMD 3 20 305 20 30
AMD 6-18 25 465 25 30
AMD 25 40 360 20 30
AMD 32 40 385 20 30