Fritz! Box Fon WLAN 7340 Installation, Configuration And Operation Download

Page: 44 / 190

Integrated Answering Machines

The FRITZ!Box is equipped with several integrated answer-
ing machines, each of which can be enabled and config-
ured individually.

By enabling the setting “Send messages by e-mail” you
can have recorded messages sent to you by e-mail. The
messages are sent as audio files.

To check an answering machine internally, enter the fol-
lowing keypad sequences:

An overview of the answering machine menu is presented
in the section “Operating the Answering Machine via Tele-
phone Keypad” on page 45.

The integrated answering machines can be enabled and
configured in the “Telephony / Telephony” menu on the
“Overview” tab by clicking the “Configure New Device”
button.

Answering machine 1

ss600

Answering machine 2

ss601

Answering machine 3

ss602

Answering machine 4

ss603

Answering machine 5

ss604

Summary of Contents for Box Fon WLAN 7340































































































































































































Search results

Summary of Contents for Box Fon WLAN 7340

Reviews:

Related manuals for Box Fon WLAN 7340

Brands by name

Popular brands

Fritz! Box Fon WLAN 7340, Installation, Configuration And Operation

Search results

Summary of Contents for Box Fon WLAN 7340

Reviews:

Related manuals for Box Fon WLAN 7340

Brands by name

Popular brands