Fritz! Box Fon WLAN 7340 Installation, Configuration And Operation Download

Page: 123 / 190

123

Declaration of CE Conformity

1.6

Declaration of CE Conformity

The manufacturer

AVM GmbH
Alt-Moabit 95
D-10559 Berlin

herewith declares that the product

FRITZ!Box Fon WLAN 7340
ADSL/VDSL WLAN router

complies with the following directives:

1999/5/EC

R&TTE Directive: Radio Equipment and Telecommu-
nications Terminal Equipment

2009/125/EC

EU directive: Ecodesign Requirements for Energy-us-
ing Products

The following norms were consulted to assess conformity:

- EN 60950-1:2011
- EN 55024:10.2003
- EN 301 489-1 V1.8.1 (2008)

- EN 301 489-6 V1.3.1 (2008)
- EN 301 489-17 V2.1.1 (2009)

- EN 300 328 V1.7.1 (10-2006)
- EN 301 893 V1.5.1 (12-2008)
- EN 301 406 V2.1.1 (07-2009)
- EN 50371:2002

The CE symbol confirms that this product conforms with the
above mentioned norms and regulations.

Berlin, 2011-03-01

Peter Faxel, Technical Director

Indication of Countries

The radio technology of this device is designed for use in all countries
of the European Union and in Switzerland, Norway and Iceland. In
France only indoor operation is permitted.

Summary of Contents for Box Fon WLAN 7340































































































































































































Search results

Summary of Contents for Box Fon WLAN 7340

Reviews:

Related manuals for Box Fon WLAN 7340

Brands by name

Popular brands

Fritz! Box Fon WLAN 7340, Installation, Configuration And Operation

Search results

Summary of Contents for Box Fon WLAN 7340

Reviews:

Related manuals for Box Fon WLAN 7340

Brands by name

Popular brands