background image

Dynamic DNS: Name Instead of IP Address

45

3.

Open any Internet page in order to establish an Internet 
connection.

4.

The FRITZ!Box’s public IP address is displayed on the 
“Overview” page in the “Connections” area.

10.3

Dynamic DNS: Name Instead of IP Address

Dynamic DNS is an Internet service that makes it possible for 
the FRITZ!Box to remain accessible from the Internet at all 
times under a fixed name, even though the public IP address 
changes.

You must register with a dynamic DNS provider to use this 
service. When you register, you agree on the fixed name (do-
main name) at which your FRITZ!Box should be accessible 
from the Internet. You also define a user name and password.

Every time the IP address changes, the FRITZ!Box transmits 
the new IP address to the dynamic DNS provider in the form of 
an update request. Then the domain name is assigned to the 
current IP address by the dynamic DNS provider.

Setting Up Dynamic DNS in the FRITZ!Box

1.

Open the FRITZ!Box user interface (see 

page 30

).

2.

Make sure that the expert mode is enabled in the “Sys-
tem / Expert Mode” menu.

3.

Select the “Internet / Permit Access” menu.

4.

Select the “Dynamic DNS” page and set up dynamic 
DNS. Consult the Online Help available in the FRITZ!Box 
user interface for more information.

Every time the Internet connection is interrupted the Internet 
Service Provider re-assigns the IP address. The IP address 
may change in the process. Therefore it is a good idea to use 
dynamic DNS so that the IP address can always be reached 
under the same name. For more information, see the section 

Dynamic DNS: Name Instead of IP Address on page 45

.

FB6840LTE-e2.fm  Seite 45  Dienstag, 29. Mai 2012  5:34 17

Summary of Contents for Box 6840 LTE






































































































































































Reviews: