Fritz! 4020 Box Configuration And Operation Download

Page: 24 / 130

FRITZ!Box 4020

The FRITZ!Box User Interface

The FRITZ!Box has a user interface you can open in a web browser on
your computer.

In the user interface you can configure the FRITZ!Box, enable or dis-
able functions and receive information on the FRITZ!Box and on your
connections.

7.1

Opening the User Interface

The FRITZ!Box user interface can be opened on any computer
connected with the FRITZ!Box.

Start a web browser on your computer.

Enter

http://fritz.box

in the address field of your web

browser.

Entering the address

http://fritz.box

in the browser

Follow the instructions on the screen and enter your
FRITZ!Box password.

The preset password is printed on the bottom of the
housing of the FRITZ!Box.

If the user interface is

not

opened, read

7.2

Overview: FRITZ!Box at a Glance

All important information about the FRITZ!Box is displayed di-
rectly on the “Overview” page of the FRITZ!Box user interface.

By clicking the linked entries or “more...” you can jump from
this page to the corresponding menus and configure settings
there.

Summary of Contents for 4020 Box



































































































































Search results

Summary of Contents for 4020 Box

Reviews:

Related manuals for 4020 Box

Brands by name

Popular brands

Fritz! 4020 Box, Configuration And Operation

Search results

Summary of Contents for 4020 Box

Reviews:

Related manuals for 4020 Box

Brands by name

Popular brands