Fritz! 4020 Box Configuration And Operation Download

Page: 112 / 130

FRITZ!Box 4020

112

Help in Case of Errors

Here you can find assistance if you are not able to open the
user interface of your FRITZ!Box or if errors occur with wireless
LAN connections.

For more help, see the AVM Knowledge Base in the Internet:

en.avm.de/service

22.1

The User Interface Does Not Open

If the FRITZ!Box user interface cannot be opened, this can
have various causes.

Work through the following steps in sequence until the error
has been resolved.

Entering http://fritz.box in the Web Browser

Enter

http://fritz.box

in your web browser instead of

“fritz.box”.

Google Chrome, for instance, performs a Google search if the
address of the FRITZ!Box is not known or was entered incom-
pletely.

Restarting the FRITZ!Box

Disconnect the FRITZ!Box from the power supply.

Wait about five seconds before reconnecting to the pow-
er supply.

Wait until the LEDs “Power” and “WLAN” (only if wireless
LAN is switched on) light up.

The FRITZ!Box is ready for operation again.

Clearing the Cache of your Web Browser

If the web browser shows only a blank, white page, empty the
cache:

Summary of Contents for 4020 Box



































































































































Search results

Summary of Contents for 4020 Box

Reviews:

Related manuals for 4020 Box

Brands by name

Popular brands

Fritz! 4020 Box, Configuration And Operation

Search results

Summary of Contents for 4020 Box

Reviews:

Related manuals for 4020 Box

Brands by name

Popular brands