Page 19
PULVERISETTE 7
4.7.2
Setting the Running Time
TIMER control panel area
Press the MILLING button.
The button will light up.
Press the "+" or "-" button and select the running time in hours (0..99) and
minutes (0..60).
Set a break time if this is required for cooling.
Press the "Pause" button.
The button will light up.
Press the "-" or "+" button and select the break time in hours (0..99) and
minutes (0..60).
If no break time is required, set the break time to 0.
Notes:
If the combination minutes/seconds instead of hours/minutes was set in the
set-up mode (section 3.6), the
h
numbers indicate the minutes and the
min
numbers the seconds.
During operation, the remaining running times and the remaining break times
are indicated.
The machine cannot be operated with an external timer.
For information on running times, see section 4.6 on Grinding Time.
To interrupt the grinding, press the STOP button; continue grinding by press-
ing the START button, n.b. account is taken of the grinding time already
elapsed and of the number of repetitions.
4.7.3
Reversing Operation
Press the REVERSE button.
The direction of rotation of the planetary monomill will now be changed after
the chosen running time has elapsed. For this function REPETITIONS is set to
minimal 1.
4.7.4
Repetition of the Grinding / Break Cycles
Repetitions control panel area
Press the "+" or "-" button and choose the number of repetitions (0..99). During
operation, the number of the remaining cycles is indicated.