12
A damaged power cord can cause electric shocks. NEVER use
the appliance if it is damaged, fallen or shows a malfunction, or
if the power cord or plug are damaged. In all these cases return
the appliance to your sales point or recognized after sales
service.
After use remove the plug from the power point. Also proceed
this way when the appliance is not in use, before cleaning and
moving.
NEVER use separate timers or remote control systems.
ALWAYS place the appliance on a solid and flat base, such as a kitchen counter or
table, so that the appliance won’t move or turn over.
NEVER use the appliance outdoor.
NEVER use extension cords or sockets. Place the appliance near a power point and
connect it directly. ALWAYS complete unroll the power cord.
NEVER let the cord hang over the edge of the table or the counter.
NEVER place the power supply cord near heat sources such as cookers, heatings
or ovens.
Only use the appliance on the mains voltage as indicated on the identification label.
This appliance is only suited for indoor household use, and not for professional use.
2.
BEFORE THE FIRST USE
Remove all packaging and stickers.
Keep packaging away from children.
First check your appliances for possible damages. If it is damaged, do NOT use the
appliance but bring it back to your sales point.
Clean the appliance as described under ‘Cleaning’ (point 4) before the first use.
The appliance is now ready for use.
Check if the mains voltage of the appliance (230V) is the same as the maisn voltage
of your house.
3.
OPERATION OF THE APPLIANCE
Completely unroll the power cord and plug in the appliance in a 230 V socket.
Put the On/Off switch on On.
The red control lamp will burn.
ATTENTION: the appliance will now get hot. Only touch the On/Off switch and the
handles.
You can now place your plates, pots, pans,… on the stainless steel plate.