10
downwards. Always check the sieve before use. If you notice cracks or damages, you cannot use the appliance anymore.
4. Place the lid with feeding tube on the juice collector (Fig. 3) and fix the safety brackets onto the lid (Fig. 4).
5. Place the pusher into the feeding tube (Fig. 5). For fine fruit and vegetables, please use the small pusher, like f.e. carrots. For large fruit and
vegetables, please use the large pusher, like f.e. apples.
6. Place a glass under the antidrip spout.
7. Wash the fruit/vegetables and slice them if needed so that they fit into the feeding tube.
8. During the extracting, always put the antidrip spout in downward position.
9. Switch on the button: choose speed 1 (low) or speed 2 (high). Remark: the appliance will only work if all parts were mounted correctly and if
the lid is fixed into the safety brackets.
10. Place the ingredients in the feeding tube and gently press them down. If you press too hard/fast this can influence the final result and in some
cases cause the motor to stop. After the ingredients are processed and all juice is in the juice collector, put the antidrip spout in upward
position, swich off the appliance and wait for the motor to stop turning entirely.
11. To dismount the appliance, you need to repeat steps 1-5 in reverse order.
USE OF THE CITRUS PRESS
1. Unroll the power cord.
2. Place the juice collector on the motor block (Fig 1) and the gearbox on the juice collector. (Fig. 2)
3. Place the citrus sieve on the clutch (Fig. 3) . Please make sure that the sieve is well fixed on the clutch.
4. Fix the two safety brackets on the citrus sieve (Fig. 4).
5. Depending on the fruit size, place the small or large pressing cone on the sieve. (Fig. 5).
6. Place a glass under the spout.
7. Wash the fruit and slice it in half.
8. During pressing, always put the antidrip spout in downward position.
9. Put the switch on position 1 (low speed). Remark: for the citrus press function, only position 1 can be used. If you use position 2, the juice will
start splashing. Remark: the appliance will only work if all parts were mounted correctly and if the lid is fixed into the safety brackets.
10. Place the fruit on the pressing cone and press gently. If you push too hard this may influence the final result and in some cases it may even
damage the motor. After the ingredients are processed and all juice is in the juice collector, put the antidrip spout in upward position, swich off
the appliance and wait for the motor to stop turning entirely.
11. In order to dismount the appliance, please repeat steps 1-5 in reverse order.
Fig. 3
Fig. 4
Fig. 5
Fig. 2
Fig. 1
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5