12
plug from the socket.
•
A damaged cord can cause electric shocks.
NEVER
use the appliance if it is
damaged, fallen or shows a malfunction, or if the cord or plug are damaged.
Return the appliance in these cases immediately to your sales point.
•
Immediately switch off the appliance and pull out the plug after use or when the
appliance is not in use, when cleaning the appliance and when moving it.
•
NEVER
use separate timers or remote control systems.
•
ALWAYS place the appliance on a solid and flat base, such as a kitchen counter or table, so that the
appliance will not move or turn over.
•
The appliance may also be used outdoor, on the following conditions:
•
The power cord should regularly be examined for signs of damage. If the cord is damaged, do not
use the appliance anymore, but immediately return it to your sales point.
•
The appliance must be connected to a socket-outlet having an earthed contact 230V.
•
The appliance must be supplied through a residual current device (RCD) having a rated residual
operating current not exceeding 30 mA.
•
After use, ALWAYS store the appliance indoors in a dry place.
•
In case an extension cord is used:
•
Only use an extension cord with a diameter that is minimum equal to the diameter of the
appliances’ cord and an integrated earthed plug, and with a higher power than the appliance.
•
Take all necessary measures to prevent someone from tripping over the extension cord.
•
NEVER let the cord hang over the edge of the table or the counter.
•
NEVER place the power supply cord near heat sources such as cookers, heatings or ovens.
•
Only use the appliance on the mains voltage as indicated on the identification label.
•
This appliance is only suited for indoor household use, and not for professional use.
2.
BEFORE THE FIRST USE
•
Remove all packaging and stickers.
•
Keep packaging away from children.
•
First check your appliance and the power cord for possible damages. If it is damaged, do NOT use the
appliance, but bring it back to your sales point.
•
Clean the appliance
as described under ‘Cleaning’
(point 4) before the first use.
•
Attach the themostat to the appliance.
•
ATTENTION: the thermostat button should always be on the upper side.
•
The appliance is now ready for use.
•
Ensure that the voltage marked on the appliance is the same as your main voltage.
3.
OPERATION OF THE APPLIANCE
•
Completely unroll the power cord, plug in the thermostat (2) into the appliance and plug in the
appliance in a 230 V socket.
•
Then turn the thermostat knob onto the chosen position.
•
ATTENTION: the appliance will now get hot. Only touch the thermostat knob and the handles.
•
You can now start to bake.
•
ATTENTION: do not use sharp objects on the baking plate, this could damage the non stick coating.
