manualshive.com logo in svg

Fristam Pumps FKL 15, Original Instructions Manual, Page: 27 / 40

Share
Download
Fristam Pumps FKL 15 Original Instructions Manual Download Page 27

27

10.13.2 Measurement of Radial Clearance

Fig. 40

Measurement of radial clearance

1. Measure the clearance between the rotor and the casing us-

ing a leaf feeler gauge; see

 Fig. 40, "Measurement of radial 

clearance," page 27

.

2. Compare the measurements with the tabulated values in 

10.13.1, "Required Clearances," page 26

10.13.3 Measurement of Axial Clearance 

Fig. 41

Measurement of axial clearance

1. Measure the clearance 

A

 between the pump casing 

(56)

 and 

the rotor 

(57)

 at several points using vernier calipers.

2. Compare the measurements with the tabulated values on 

page 26.

3. Check whether the drive shaft rotates freely, using a tool 

attached to the rotor fastener.

4. Compare the measurements with the tabulated values in 

10.13.1, "Required Clearances," page 26

.

10.13.4 Measurement Results

Based on the result of the measurements, take one of the fol-
lowing procedures:

Measurements are within the range of tabulated values.

►

Seal the pump; see 

Chapter 10.9.3, "Pump Sealing," 

page 24

. 

The clearance measurement is finished. 

Clearances are outside of the range of tabulated values.

– Radial  clearance

►

Contact 

Fristam

 to order the documents for repinning of 

the pump casing.

– Axial  clearance

►

Contact 

Fristam

.

A

57

56

Summary of Contents for FKL 15









































Reviews:

No comments