9
2.4
Signs attached to mixer
►
Do not alter or remove the signs attached to the powder mixer.
►
Replace damaged or missing signs without delay.
2.4.1
Safety signs
Fig.
1
“Hot
surface"
The "Hot surface" sign indicates that parts of the machine might become hot during operati-
on or that a hot base medium might be pumped. Before touching a component, make sure
that it is not hot. Wear suitable protective gloves.
Fig.
2
"Do not reach into hopper"
The "Do not reach into hopper" sign indicates that it is forbidden to reach into the hopper
while the mixer is running. There is a risk of injury from the valve.
Fig.
3
"Do not bend over hopper"
The "Do not bend over hopper" sign indicates that breathing in dust or aerosols escaping
from the hopper must be avoided. Dust and aerosols can irritate the respiratory tract. If re-
quired, wear a dust mask.
If the machine is incorrectly operated, there is a risk that liquid escapes at high pressure from
the hopper, causing injury.
Fig.
4
"Do not place small parts in hopper"
The "Do not place small parts in hopper" sign indicates that it is forbidden to place small, so-
lid parts such as rocks or metal components in the powder mixer, as they might damage or
even destroy pumps and other components, and contaminate the product. In an emergen-
cy, press the emergency stop button and remove small parts from the mixer.
Fig.
5
"Wear hearing protection"
The "Wear hearing protection" sign indicates that there is a risk of damage to hearing from
high noise emissions. While the powder mixer is in operation, wear hearing protection.
