Fripac Mondial K-4231, User Manual, Page: 21 / 54

20 - EN - User Manual K-4231
Operating instructions
Warning! The device is not suitable for artifi cial hair or extensions. Only
use on clean, dry hair. Do not use in combination with styling products
such as gel or hair spray.
You should comb your hair well before use so that it is free of tangles.
If necessary, use a detangling brush such as the Denman Tangle Tamer
Ultra.
Remove the protective cover from the device.
Move the on/off switch to the A, L or R position to switch on the device.
Set the temperature, time and direction of rotation (see above) and wait
until the device has heated up.
Separate a section of hair with a maximum diameter of 1.5 cm and feed
it through the curling chamber as shown in graphic 1.
Press the curl button (

). The hair will automatically be drawn into the
curling chamber and the device will beep until the set time has passed
(see graphic 2).
After the beeping has stopped slowly pull the device out in the direction
of the hair tips.
Repeat these steps until the styling is complete.
Let the hair completely cool off before the fi nal combing or brushing.