background image

 

Thus,  so  far  AF  is  an  experimental  feature.  Not  all  Contax  645  lenses  support  AF  (See  the 

table  in  part  1.  Note:  The  list  of  lenses  supporting  AF  may  expand  after  future  firmware 
upgrades). The speed and accuracy of AF may not satisfy you. If you can’t accept it, please use MF 
instead. 

Currently  only  AF-S  is  supported.  If  you  set  the  camera  to  AF-C  mode,  the  lens  may  keep 

hunting and fail to focus. 

If possible, half press the shutter release button and let the lens focus for several times may 

help improving AF accuracy. And remember, at any time when you feel AF is not working properly, 
you may reset the adapter and the lens by playing back a photo and then setting the camera back 
to the shooting mode again. 

 

6.

 

Firmware upgrading 

Please follow these steps to upgrade your adapter. 

1)

 

Download  firmware  file  from  Fringer’s  website  (see  README.EN.pdf  on  adapter’s  root 
directory for the URL). For example, C6GF_200.BIN means Contax645-GFX adapter V2.00.   

2)

 

Get the adapter off the camera. Do not connect G.CAP (if provided), either. Make sure 

not to 

connect the adapter with the computer while it is installed on a camera body

3)

 

Plug the Micro USB cable to the port inside the tripod mount of the adapter. Be careful! Mind 
the 

direction

 and 

do not push too hard

. Or you 

may damage the Micro USB port

 of the 

adapter! 

4)

 

Connect  the  other  end  of  the  cable  to  a  USB  port  of  your  PC  or  MAC.  Then  a  mobile  drive 
named  ‘FRINGER’  emerges.  Open ‘VERSION.TXT’ on that drive and check current firmware 
version (the line begins with ‘Version:’).   

5)

 

If  upgrading  is  needed,  copy  the  downloaded  firmware  file  to  the  drive  named  ‘FRINGER’. 
Then  eject  the  drive.  Ejection  is  a  mandatory  step  for  Macs  and  an  optional  step  for  PCs. 
Ignore any error messages about the drive. Wait for more than 10 seconds. Then disconnect 
the adapter with the computer. 

6)

 

Reconnect  your  adapter  with  the  computer.  Check  VERSION.TXT  again  and  make  sure  its 
firmware version has changed to the new one.   
Note:  Do  not  copy  files  other  than  firmware  provided  by  Fringer’s  official  website  to  the 
adapter. 

Summary of Contents for Contax 645

Page 1: ...Sonnar T 2 8 140 Y Sonnar T 4 210 N Tele Apotessar T 4 350 N Vario Sonnar T 4 5 45 90 N Sonnar T 2 8 140 Mutar 1 4x T Y Sonnar T 4 210 Mutar 1 4x T N Tele Apotessar T 4 350 Mutar 1 4x T N The adapter has been tested on GFX50s camera body Theoretically it may support future G mount bodies Please be noted that so far AF is an experimental feature On one hand not all lenses support AF On the other ev...

Page 2: ...o the previous versions of firmware now the aperture and focal length information are all displayed and recorded correctly See the following table for details Contax 645 lenses Max aperture Correct aperture on LCD EVF and in EXIF Recorded focal length Correct focal length in EXIF Distagon T 3 5 35 F3 5 Y 35mm Y Distagon T 2 8 45 F2 8 Y 45mm Y Distagon T 3 5 55 F3 5 Y 55mm Y Planar T 2 80 F2 0 Y 80...

Page 3: ...ok at GFX50s aperture control strategy 1 Under MF mode AM MF switch on MF the aperture blades are always wide open during view finding metering and focusing until the shutter release button is pressed 2 Under AF mode with aperture priority disabled shutter speed dial on positions other than A aperture blades move at once when you change aperture setting During AF process the aperture blades may te...

Page 4: ...ans Contax645 GFX adapter V2 00 2 Get the adapter off the camera Do not connect G CAP if provided either Make sure not to connect the adapter with the computer while it is installed on a camera body 3 Plug the Micro USB cable to the port inside the tripod mount of the adapter Be careful Mind the direction and do not push too hard Or you may damage the Micro USB port of the adapter 4 Connect the ot...

Reviews: