14
Repairing bearing elements
Repairs on bearing elements of the Slidelift can only be performed in an authorized service dealer,
must be verified by an expert and have to be recorded in the control book.
Defective under ride energy absorbers can not be repaired and must be replaced.
For any malfunctioning, first check voltage level
Troubleshooting
Problem
possible cause
1. Motor of pump box
does not turn on
Battery cable or ground cable not connected or defective
Main fuse defective
Fuse in aggregate defective
The power relay is defective and doesn't activate
Motor defective
2. Motor does not work
on one function only
Toggleswitch on hand control box defective
Cable from hand control box to pump box defective
Wiring inside pump box defective
Switch relay defective (Starter Solenoid)
3. Slidelift does not
come out or comes out
slowly
Lift stuck on vehicle chassis
Cable connection to magnetic valves defective
Please refer to wiring
diagram attached to this
operator’s handbook
Magnetic valves on slide cylinders defective
Bypass inside tilting cylinder defective or blocked
Solenoid valves
4. Slidelift does not
lower or lowers very
slowly.
Magnetic valves Y3 are not activated or defective
REPARACIÓN DE ELEMENTOS
DE RODAMIENTO
