Livøvej 22 - 8800 Viborg - Tlf. 86 61 34 11 - [email protected] - www.vibocold.dk
Totalløsninger i køl og frys
G 315 A++
Chest Freezer
290615
Total solutions in refrigeration and freezing
Service manual
SERVICE MANUAL
Model: G315A++
12
Issue 2014-03-13
Rev.
Ref1102S001V0
4-4. Thermostat assembly
First take off the knob (refer 4-3), Use turnbuckle spanner or acutilingual plier, unscrew the
turnbuckle, then thermostat can be moved from back of panel.
Note
: When assembly thermostat you should placed thermostat in originally direction.
Chapter 5 Control and display system
5-1. Control panel
Freezing temperature selection is made by setting the control from
min
to
max
(coldest).
If you want colder or warmer temperatures, adjust the control one step at a time.
Allow several hours after each one-step adjustment for the freezer temperature to stabilize.
5-2. Starting the Freezer
1. Clean the inside of the freezer with a mild solution of baking soda and water
2. Connect cord to power outlet.
3. The display screen presents the original setting temperature 0
°
F or -18
℃
and blinks with
1HZ frequency; Then it displays actual inside temperature automatically after 5 seconds.
4. To press the downward button for 3 seconds under keyboard locking condition, temperature
display starts to flash and the system is entering the setting status( when it comes into setting
status every time, the figure of temperature blink is the one of setup last time ).
5. Allow freezer to operate for at least two hours before placing food inside.
